GoLogin Setup on a Los Angeles Mobile Proxy

GoLogin is the second antidetect browser we recommend, and it works cleanly with a Los Angeles carrier line. Like Undetectable.io, it can take the geography from the proxy, so the time zone and location follow the address. This guide covers the GoLogin desktop app from a blank account to a verified California profile. It assumes you already have an active line from California Proxies and its endpoint details to hand; if not, the hourly plan is the cheap way to get one for the setup.

Before you open GoLogin

Have your line's host, HTTP(S) port, SOCKS5 port, username and password open in another window from the dashboard at ca.californiaproxies.com. Decide what the profile is for, because that drives two choices: desktop or mobile fingerprint, and sticky or rotating address. Account work wants sticky and a fingerprint that matches how the account was created; verification sweeps want rotation between runs.

Also decide where the machine running GoLogin lives. If it is outside Pacific time, that is fine: GoLogin sets the profile's time zone independently of the host, which is the point of using it. Just make sure nothing else on the machine, such as a VPN, sits in the path between GoLogin and the line.

• GoLogin

Add the Los Angeles line

GoLogin lets you attach a proxy directly inside a profile or keep it in a proxy list and reuse it. The list is tidier if you run more than one profile, and it is where the connection check lives.

1. Open GoLogin and go to the Proxies tab in the sidebar.
2. Click Add proxy. Choose HTTP for the HTTP(S) endpoint or SOCKS5 for the SOCKS5 endpoint.
3. Enter the host and port from your California Proxies dashboard, then the username and password.
4. Name the entry, for example LA T-Mobile 5G, so it is easy to find later.
5. Click the check icon next to the saved proxy. GoLogin should show the external address and place it in the United States, California, with Los Angeles or a nearby Southern California location.
6. If the check fails, confirm you picked the type that matches the port. The two ports are different numbers.

Build the California profile

GoLogin generates a fingerprint when you create a profile and lets you adjust the parts that matter. The default generated fingerprint is usually fine; the settings you should touch are the operating system, the proxy, the time zone source, the language and WebRTC.

1. Click Create profile on the Profiles tab.
2. Name the profile after the account or job it carries.
3. Pick the operating system the fingerprint should claim. A current Windows or macOS build is the ordinary choice for a tethered-laptop look; choose Android only for an account that lives on a phone.
4. Open the Proxy section and select the Los Angeles line from your list.
5. In the Time zone section, leave the option that fills the zone based on the IP. The profile will report America/Los_Angeles.
6. In Geolocation, leave the option that follows the proxy, so any site that asks for location gets a Southern California answer that agrees with the address.
7. Set Language to en-US. Add a second language only if the account actually uses one.
8. Leave WebRTC on the altered mode that reports the proxy address rather than your real one.
9. Save the profile and click Run.

Verify the profile

With the profile running, prove to yourself that it is consistent before it meets any account. Every item below is visible to a site, so every item should agree with Los Angeles.

1. Load a lookup page and read the external IP, ASN and location. You want a carrier ASN and a Los Angeles or California placement.
2. Read the time zone the page reports from the browser. It should be America/Los_Angeles with the current Pacific offset.
3. Read the language list. en-US first.
4. Run a WebRTC leak check. The only address shown should be the proxy address.
5. Repeat the IP check on a second lookup service. Agreement on the state is what matters; metro-level disagreement between services is normal.

Running it day to day

Sticky by default: leave the address alone and the carrier keeps the session for as long as it keeps it. The profile does not care if the carrier swaps the address in the background; it keeps the same fingerprint and the same time zone because they came from the same metro. Rotate on demand from the California Proxies dashboard, the rotation link, the API or a timer when the job calls for a fresh address between runs.

One account per line is the rule worth keeping. GoLogin will happily put the same proxy on ten profiles, and for sweeps that is fine, but for accounts it ties them together by address and by rotation. Lines start at $2 for two hours or $5 a day, so separating them costs little. If you need the profile in a different US city, move the line from the dashboard and GoLogin picks up the new address on the next run; set the time zone source to follow the IP and it adjusts too.

If something looks wrong

Wrong time zone: the profile has a manual zone set, usually inherited from a cloned profile. Switch it back to the IP-based option. Real address visible: a tab was opened outside GoLogin, or a VPN on the host is in the path. Proxy check fails: port and type do not match, or the line is in your dashboard as paused. A different state on a lookup: rotate and check again; it is a database quirk on a shared carrier address and the next address will read normally.

Support is at [email protected] and on Telegram at @CaliforniaProxiesBot, around the clock. Send the profile's lookup result and we can usually tell you what is going on from that.

Frequently asked